|
|
Build Your Online Product Catalogs?
| Product Name: |
50000 m³ fly ash AAC plant
|
| Supply Ability: |
1 |
| Related proudcts |
aac plant, aac block production, |
| Specifications |
50000m³ |
| Price Term: |
FOB |
| Port of loading: |
Qingdao |
| Minimum Order |
1 |
| Unit Price: |
1 |
|
We introduce the advanced technology of domestic and international, high pass-rate of production .
1.The Introduction of 50000 m³ fly ash AAC plant
♥feature of 50000 m³ fly ash AAC plant: fly ash Autoclave Aerated Concrete Block (fly ash AAC Block) is the light and porous building material.It has the advantages of Light Weight, Keeping Temperature, Heat Resistant, Fireproof, High Intensity, Good Sound Insulation and Machinability, Conveniently Mechanized Construction, etc.
♥size of 50000 m³ fly ash AAC plant:fly ash AAC Block can be made into many different size of blocks (for example: 600× 200× 100, 600× 200× 125, 80× 80× 180, 240× 115× 53, etc), widely used for industry building and common house building.they will completely replace the Clay Bricks and Normal Concrete Blocks in building construction.
2. Conception of 50000 m³ fly ash AAC plant
The density of common concrete block is around 1600-2400kg/m3, but fly ash aac Block is 500kg/m3, 600kg/m3, 700kg/m3. It has not the big grain, mainly made from silicon material, for example: Fly ash, sand, cement, quick lime, gypsum and so on.
In brief, there are 5 steps to make fly ash AAC Block,
1. first, preparing raw material;
2.Second, mixing the measured raw material to make slurry and pouring;
3.Third, pre-ageing and cutting the green block body;
4. Fourth, grouping the cut block and autoclaving;
5.Fifth, packing the autoclaved block and transporting out of plant.
�0000 m³ fly ash AAC plant Suitable materials
Fly ash, sand, lime, gypsum, cement, water, aluminum powder and aluminum paste
3.50000 m³ fly ash AAC plant Production Engineering
1. First, dose and match measured raw materials
2. After distributing, feed raw material into pouring mixer to make slurry
3. Through thoroughly mixing, the slurry is poured to mould
4. After pre-curing with a certain temperature & time, the block would reach certain hardness prepare for cutting
5. Tilting hoister would turn over 90 degree of |
| Company: |
Zhengzhou Xinyun Heavy Industry Co,Ltd
|
| Contact: |
Ms. Yvonne Li |
| Address: |
No.1,Zhengshang Road |
| Postcode: |
450007 |
| Tel: |
+86-0371-64966899 |
| Fax: |
+86-0371-64968680 |
| E-mail: |
|
|
|
|
Home
